IWILL VD133, Manual, Page: 65 / 80

65
VD133 Pro Series
Chapter 5 BIOS Setup
5.7.1.3 APM Suspend Timer
This field specifies the time the system enters power-saving mode. It is
available only when the Power Management field is set to User Define.
Options
1 Min / 2 Min / 4 Min /6 Min / 8 Min / 10 Min / 20 Min
30 Min / 40 Min / 1 Hour / Disable (*)
5.7.2 ACPI Suspend Type
There are several ACPI modes used to save computer’s energy
S1 (POS) (*) This is the Power-On-State, the CPU clock runs at slower speed, the
system operates at slower speed
S3 (STR) This is the Suspend-To-Ram State, all system data will be saved in
system’s memory and all devices except the memory will shut off
. e d o m 3 S e h t t r o p p u s n a c , d r a c A G V r u o y g n i k c e h c e s a e l P
5.7.3 PM Control by APM
When enabled, an Advanced Power Management (APM) protocol will be activated
to handle the power-saving mode.
Options Yes (*)
No
5.7.4 Video off Option
This field specifies the method that video subsystem used for power saving.
Options Descriptio
Always ON Monitor will remain on during power saving modes
Suspend Off Monitor blanked when the systems enters the Suspend modes
All Modes Off Monitor blanked when the system enters any power saving
mode.
5.7.5 Video off Method
This field specifies the method that video subsystem used for power saving.
Options Description
V/H SYNC+Blank Turn off the vertical and horizontal synchronization ports
and write blanks to the video buffer
Blank Screen Writes blanks to the video buffer only
DPMS (*) Initial display power management signaling with DPMS