manualshive.com logo in svg

IWILL VD133, Manual, Page: 58 / 80

Share
Download
IWILL VD133 Manual Download Page 58

58

VD133 Pro Series

Chapter 5 BIOS Setup

5.5.11 Video RAM Cacheable

When enabled, access to the video memory located at A0000H to BFFFFH will be
cached.

Options

Enabled (*)

Disabled

5.5.12 AGP Aperture Size (MB)

This field specifies the size of system memory that can be used for AGP graphics
aperture.

Options

4M / 8M / 16M / 32M / 64M (*) / 128M

5.5.13 OnChip USB Port 0

This should be enabled if your system have USB port 0 external on the system board
and you wish to use it. Even when so equipped, if you add a higher performance
controller, you will need to disable this feature.

Options

Enabled

Disabled (*)

5.5.14 OnChip USB Port1

This should be enabled if your system have USB port 1 internal on the system board
and you wish to use it. Even when so equipped, if you add a higher performance
controller, you will need to disable this feature.

Options

Enabled

Disabled (*)

5.5.15 USB Keyboard Under DOS

Select Enabled if your system contains a Universal Serial Bus (USB) controller and
you have a USB keyboard under DOS

Options

Enabled

Disabled (*)

Summary of Contents for VD133

















































































Reviews:

No comments