IWILL VD133, Manual, Page: 69 / 80

69
VD133 Pro Series
Chapter 5 BIOS Setup
5.8.3 Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the
boot and Plug and Play compatible devices. However, this capability means abso-
lutely nothing unless you are using a Plug and Play operating system such as
WindowsÒ98/95/NT. If you set this field to “manual” choose specific resources by
going into each of the sub menu that follows this field (a sub menu is preceded by a
“Ø”).
Options Description
Auto (ESCD)(*) Resources controlled by BIOS automatically
Manual Resources controlled by the user
5.8.3.1 IRQ Resources
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
5.8.3.1.1 IRQ3/4/5/7/9/10/11/12/14/15 assigned to
This item allows you to determine the IRQ assigned to the
ISA bus and is not available to any PCI slot. Legacy ISA for
devices compliant with the original PC AT bus specification,
PCI/ISA PnP for devices compliant with the Plug and Play
standard whether designed for PCI or ISA bus architecture.
Options PCI Device
Reserved
5.8.4 PCI / VGA Palette Snoop
This field controls the ability of a primary PCI graphics controller to share a common
palette with an ISA/VESA video or MPEG card
Options Description
Enabled PCI VGA co-works with ISA MPEG card
Disabled (*) All cases except above
5.8.5 PCI 1/ On board RAID IRQ Use
(On board RAIID VD133 Pro only)
This field determines the IRQ setting for PCI1. PC1 and PC2 may share the same IRQ,
or other options may be selected. The default setting for this field is Auto, which uses
automatic-routing to determine the setting.
Options Auto (*) / 3 / 4 / 5 / 7 / 9 / 10 / 11 / 12 / 14 / 15
5.8.6 PCI 2 IRQ Use
This field determines the IRQ setting forPCI2. The default setting for this field is
Auto, which uses automatic-routing to determine the setting.
Options Auto (*) / 3 / 4 / 5 / 7 / 9 / 10 / 11 / 12 / 14 / 15