manualshive.com logo in svg

IWILL VD133, Manual, Page: 68 / 80

Share
Download
IWILL VD133 Manual Download Page 68

68

VD133 Pro Series

Chapter 5 BIOS Setup

IRQ

 Options

IRQ3 (COM 2)

Disable/Enable(*)

IRQ4 (COM 1)

Disable/Enable(*)

IRQ5 (LPT 2)

Disable/Enable(*)

IRQ6 (Floppy Disk)

Disable/Enable(*)

IRQ7 (LPT 1)

Disable/Enable(*)

IRQ8 (RTC Alarm)

Disable(*)/Enable

IRQ9 (IRQ2 Redir)

Disable(*)/Enable

IRQ10 (Reserved)

Disable(*)/Enable

IRQ11 (Reserved)

Disable(*)/Enable

IRQ12 (PS / 2 Mouse)

Disable/Enable(*)

IRQ13 (Coprocessor)

Disable/Enable(*)

IRQ14 (Hard Disk)

Disable/Enable

IRQ15 (Reserved)

Disable(*)/Enable

5.8

PnP/ PCI Configurations

5.8.1 PNP OS Installed

The field specifies whether a Plug and Play operating system is installed.

Options

Yes

No (*)

5.8.2 Reset Configuration Data

Normally, you leave this field Disabled.  Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system can not boot.

Options

Enabled

Disabled (*)

Summary of Contents for VD133

















































































Reviews:

No comments