IWILL UPX, User Manual, Page: 72 / 78

4-1
Appendix A
Troubleshooting
The following is a checking procedure for common problem encountered
during system assembly.
Unexpected Symptom happens
Turn-Off the system power and unplug the AC power cord, then remove all
of add-on cards and peripherals inclusive VGA,FDD,IDE,ATAPI device and
so on
Check if all jumper settings are correct
Make sure only CPU, memory modules
、
mouse and keyboard are
inserted properly on the mainboard and 115/230V switch on the power
supply is properly set. Then connect onboard VGA port to monitor.
Toubleshooting Procedure
Plug the power cord(s) into onboard power connector(s) and turn-on the power
supply. Make sure the system is on soft-off
Clear CMOS (Please refer to the P1-2 in the section "Jumper Setting")
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Power-On the system and check if the
CPU fan work properly and POST
screen displays on the monitor
Contact your reseller or local
distributor for checking your
system
Continue on the next page
Step 7-1
Step 7-2
Yes
NO
Troubleshooting