IWILL UPX, User Manual, Page: 66 / 78

3-2
Press <ESC>
Pressing <Esc> switches to the POST screen and takes one of two actions:
1. If MultiBoot is installed, the boot process continues with the POST
screen until the end of POST, and then displays the
Boot First
Menu , text-based with these options:
A: Load the operating system from a boot device of your choice.
B: Enter Setup.
C: Exit the Boot First Menu (with <Esc>) and load the operating
system from the boot devices in the order specified in Setup.
2.
If MultiBoot is not installed, the boot process continues as usual.
Press <F2>
Pressing <F2> at any time during POST switches to the POST screen (if not
already displayed) and enters Setup.
POST Error
Whenever POST detects a non-fatal error, QuietBoot switches to the POST
screen and displays the errors. It then displays this message:
Press <F1> to resume, <F2> to Setup
Press <F1> to continue with the boot. Press <F2> if you want to correct the
error in Setup.
Keyboard Input Request
If the BIOS or an Option ROM (add-on card) requests keyboard input,
QuietBoot switches over to the POST screen and the Option ROM displays
prompts for entering the information. POST continues from there with the
regular POST screen.
Phoenix MultiBoot
Phoenix MultiBoot expands your boot options by letting you choose your boot
device, which could be a hard disk, floppy disk, or CD ROM. You can select
BIOS Utility