IWILL UPX, User Manual, Page: 38 / 78

1. By pressing the <F2> key when the following message appears
briefly at the bottom of the screen during the POST (Power On
Self-Test).
Press F2 to enter SETUP.
If the message disappears before you respond and you still wish to enter
Setup Program, restart the system from state “On” to state “Off” by pressing
the "RESET" button on the system case. You may also restart the system by
simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. If you do not press
the keys at the correct time and the system does not boot as well, an error
message will be displayed and you will again be asked to...
PRESS F1 TO CONTINUE, F2 TO ENTER SETUP
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select,
press <Esc> to quit. The following table provides more details about how to
navigate in the Setup program using the keyboard.
2-2 BIOS Setup