IWILL UPX, User Manual, Page: 62 / 78

2-26
Section 6
Exit Menu
Selecting "Exit" from the menu bar displays this menu:
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Exit System Setup
and save your
changes to CMOS.
F1 Help
↕
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
↔
Select Menu Enter Select Sub-Menu F10 Save and Exit
The following sections describe each of the options on this menu. Note that
<Esc> does not exit this menu. You must select one of the items from the
menu or menu bar to exit.
Saving Values
After making your selections on the Setup menus, always select either "Saving
Values" or "Save Changes." Both procedures store the selections displayed in
the menus in
CMOS (short for "battery-backed CMOS RAM") a special section
of memory that stays on after you turn your system off. The next time you boot
your computer, the BIOS configures your system according to the Setup
selections stored in CMOS.
After you save your selections, the program displays this message:
Values have been saved to CMOS!
Press <space> to continue
BIOS Setup