5
This SCSI Motherboard is shipped with
manufacture preset at :
1.
CPU Clock at
200 MHz
2.
Adaptec Ultra Wide SCSI Chip
Enabled
3.
Wide SCSI Mode
Enabled
4.
SCSI Terminator
Control by BIOS
5.
Printer ECP Mode at
DMA3
6.
Printer at
IRQ7
, Address at
378h
7.
Serial 1 at
IRQ4,
Serial 2 at
IRQ3
8.
PS/2 MOUSE at
IRQ 12
Reference to the
Chapter 3
&
Chapter 4
, if you
have devices conflict with the manufacture default.
Step 1. Install CPU and Cooler
Ma ke sure the Clock Frequency is set to the sa me a s the CPU
insta lled.
Step 2. Install the memory
Plug a t lea st 2 PCS of 72 pins Micro Edge DRAM modules.
Step 3. Install display controller and connect I/O ports
This system boa rd is designed using
PCI
(Periphera l Component
Interconnect) a nd
ISA
(Industry Sta nda rd Architecture) interfa ce
controller. This s5Volt interfa ce slots. All PCI interfa ce
controllers must be PCI Rev 2.1 complia nt.
Step 4. Connect the power supply
Connect AT P8 a nd P9 or the ATX ( Recommended ) from
power supply output.
Step 5. Power on the system
Turn on the Computer power.( Ma ke sure the voluta ge 110 or
220 in your a rea )
Step 6. Setting up the system
Enter the "
Setup Menu
" screen by press the "
Del
" key while
power on or wa rm reset the system. Alwa ys "
LOAD SETUP
DEFAULT
" a t first a nd select others necessa ry tha t your
system require.
