61
5.6.3.2 Delete Suspend to Disk From DOS Directly
Enter DOS during the re-boot process by pressing the <F8> key after powering on the system, and
selecting “Command prompt only.” Or, if your system normally runs from DOS, or you have a DOS
diskette, simply boot from DOS.
1.
Insert your Suspend to Disk diskette into your floppy disk drive. (See above).
2.
Type the following:
C:\>A:
Press <Enter>
3.
Then, follow procedures “5” through “7” in 5.6.3.1 (above).
4.
Since the system is not controlled by Windows, it will automatically re-boot.
Summary of Contents for BD100 Plus
Page 14: ...14...
