IWILL BD100 Plus, User Manual

Page: 11 / 64

11
Location Screen Printing Description
J3 Slot 1 Processor Slot 1 connector
J5--J8 DIMM0--3 168-pin DIMM Sockets
J11 AGP AGP connector
J12--J16 PCI1--5 PCI expansion slots
J21--J22 J21, J22 ISA expansion slots
J28 IDE 0 Primary IDE connector
J29 IDE 1 Secondary IDE connector
J30 FDC Floppy drive connector
J31 S1 Serial 1 connector
J32 S2 Serial 2 connector
J33 LPT Parallel connector
J34 USB Two USB connectors
J35 MS PS/2 mouse connector
J35 KB PS/2 keyboard connector
J37 PWR Standard ATX power connector
J39 FAN1 Processor fan header
J40 FAN2 System fan header
J41 FAN3 System fan header
J42 PWR ON Remote power-on/off header
J43 J43 Front panel I/O header
ACPI LED (pins 1--2): ACPI LED header
ALED (pins 5--6): IDE LED header
RST (pins 9--10): Reset Switch header
PLED (pins 11--13): Power LED header
KL (pins 14--15): Keylock switch header
SPKR (pins 17--20): Speaker header
J44 SB-LINK Creative SB-LINK header
J45 IR IR (infrared) connector
J46 WOL Wake On LAN header
J50 Tmp2 2nd temperature sensor header
J52 KB ON PS/2 Power-On jumper block
JP1 CLRTC Jumper for clearing CMOS
JP5 JP5 Jumper for PCI devices compatibility
JP9 JP9 Adjustable Vcore (5% or 10 %)
JP10 VIO Adjustable VIO (3.5, 3.6, or 3.8)
JP11 JP11 Adjustable AGP Frequency
JP42 JP42 Clear Keyboard Power-On Password