IWILL BD100 Plus, User Manual

Page: 33 / 64

33
4.3.4 Drive A / Drive B
This field specifies the traditional type of the floppy drives.
Options Description
None No floppy drive is connected
360K, 5.25 in. A 360K floppy drive is connected
1.2M, 5.25 in. A 1.2M floppy drive is connected
720K, 3.5 in. A 720K floppy drive is connected
1.44M, 3.5 in. A 1.44M floppy drive is connected
2.88M, 3.5 in. A 2.88M floppy drive is connected
4.3.5 Floppy 3 Mode Support
3 Mode floppy drive is a type of 3.5-inch drive used by NEC PC98 computers. It supports both 1.2M
and 1.44M formats using the same drive. This field specifies which drive supports 3 Mode. When a
floppy drive is specified to support 3 Mode, the respective drive setting in “Drive A / Drive B” field
will be invalid.
Options Description
Disabled No 3 Mode drive is connected
Drive A A 3 Mode drive is connected as drive A
Drive B A 3 Mode drive is connected as drive B
Both Both drive A and drive B are 3 Mode drives
4.3.6 Video
This field specifies the type of the graphics adapters used by the primary system monitor.
Options Description
EGA/VGA Specifies EGA or VGA adapter
CGA 40 Specifies CGA adapter with 40 column mode
CGA 80 Specifies CGA adapter with 80 column
MONO Specifies Monochrome adapter
4.3.7 Halt On
This field determines how the system reacts to errors once detected.
Options Description
All Errors Each time the BIOS detects a non-fatal error, the system will
stop and display an error message
No Errors The system will not stop for any errors that are detected
All, But Keyboard The system will stop for any errors except keyboard error
All, But Diskette The system will stop for any errors except diskette error
All, But Disk/Key The system will stop for any errors except diskette and
keyboard errors