IWILL BD100 Plus, User Manual

Page: 44 / 64

44
4.6.15 Power-On By Ring
When enabled, the PC can power-on through an external modem connected to your PC. For example,
you may send an e-mail message to your PC from another location, and this will power-on your PC.
When using this feature, you must have a modem, and your PC must be turned off.
Note: This feature alone doesn’t allow you to power off your PC (see 4.6.10 Suspend Mode).
Options Enabled
Disabled (*)
4.6.16 Resume by Alarm
When enabled, you can set the date and time to automatically power-on your PC (similar to an alarm
clock). The alarm from RTC (real-time clock) automatically turns on the system.
Options Description
Disabled (*) Disables RTC alarm function
Enabled Sets the date and time to power-on the PC.
When date is set to 0, the alarm becomes set for every day.
4.6.17 IRQ 8 Break Suspend
When disabled, this feature allows the system to go into suspend mode. When enabled, IRQ 8 (RTC)
is broken, and the system cannot go into suspend mode.
Options Enabled
Disable (*)
4.6.18 Reload Global Timer Events
This field enables the system to detect activity, and restart the timer of the power saving mode.
IRQ [3-7, 9-15], NMI
If enabled, timer restarts whenever any of these interrupts occurs.
Primary IDE 0
If enabled, timer restarts whenever the master disk of the primary IDE channel is active.
Primary IDE 1
If enabled, timer restarts whenever the slave disk of the primary IDE channel is active.
Secondary IDE 0
If enabled, timer restarts whenever the master disk of the secondary IDE channel is active.
Secondary IDE 1
If enabled, timer restarts whenever the slave disk of the secondary IDE channel is active.
Floppy Disk
If enabled, timer restarts whenever the floppy disk is active.
Serial Port
If enabled, timer restarts whenever the serial port is active.
Parallel Port
If enabled, timer restarts whenever the parallel port is active.