iWave iW-RainboW-G22M, Hardware User'S Manual

Page: 32 / 62

REL1.2
Page 32 of 62
RZ/G1E SODIMM SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Pin
No.
SODIMM Edge Connector
Signal Name
CPU Ball Name/
Pin Number
Signal Type/
Termination
Description
100 HSCIF2_HRTS(GP0_12) D12/
A2 O, 3.3V CMOS HSCIF2 High Speed Serial Communication
Interface ready to receive handshake
signal.
Note: Same signal is optionally connected
to Wi-Fi/BT module through resistor and
default not populated.
101 HSCIF2_HCTS(GP0_11) D11/
B3 I, 3.3V CMOS HSCIF2 High Speed Serial Communication
Interface ready to send handshake signal.
Note: Same signal is optionally connected
to Wi-Fi/BT module through resistor and
default not populated.
102 HSCIF1_HTX(GP4_9) HSCIF1_HTX/
AA23 O, 3.3V CMOS HSCIF1 High Speed Serial Communication
Interface serial data transmitter.
103 HSCIF1_HRX(GP4_8) HSCIF1_HRX/
AB23 I, 3.3V CMOS HSCIF1 High Speed Serial Communication
Interface serial data receiver.
104 ETH_REF_CLK/VI1_DATA4(
GP5_16) SSI_SDATA2/
AC4 I, 3.3V CMOS VIN1 Parallel camera data 4.
Note: GP1_17 is optionally connected to
this pin through resistor and default not
populated.
105 SD0_CD(GP6_6) SD0_CD/
AB12 I, 3.3V CMOS/
10K PU SD0 Card Detect.
106 VIN_3V3 NA I, 3.3V Power Supply Voltage.
107 SD0_DAT0(GP6_2) SD0_DATA0/
AC11 IO, 3.3V CMOS/
10K PU SD0 Data0.
108 SD0_CMD(GP6_1)
1
SD0_CMD/
AD12 IO, 3.3V CMOS/
10K PU SD0 command.
109 SD0_CLK(GP6_0) SD0_CLK/
AE12 O, 3.3V CMOS/
1K PU SD0 clock.
Note: 33E series termination is
connected.
110 ETH_TX_EN/VI1_DATA6(G
P5_18) SSI_WS9/
AD3 I, 3.3V CMOS VIN1 Parallel camera data 06.
Note: GP1_19 is optionally connected to
this pin through resistor and default not
populated.
111 SD0_DAT1(GP6_3) SD0_DATA1/
AD11 IO, 3.3V CMOS/
10K PU SD0 Data1.
112 SD0_DAT2(GP6_4) SD0_DATA2/
AE11 IO, 3.3V CMOS/
10K PU SD0 Data2.
113 GND NA Power Ground.
114 SD0_DAT3(GP6_5) SD0_DATA3/
AA12 IO, 3.3V CMOS/
10K PU SD0 Data3.
115 I2C5_SDA(GP0_15) D15/
F5 IO, 3.3V OD/
1K PU I2C5 data.