iWave iW-RainboW-G22M, Hardware User'S Manual

Page: 10 / 62

REL1.2
Page 10 of 62
RZ/G1E SODIMM SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
1.6 Important Note
RZ/G1E SODIMM Edge connector signal name mentioned in Table 6 is followed as per below format for easy
understanding.
•
If CPU pin has multiplexing option and selected particular function, then the signal name is mentioned as
“ Selected Function Name (GPIO Number )”
Example: CAN0_RX(GP6_14)
In this signal, CAN0_RX is the functionality which we are using and GP6_14 is the GPIO number.
•
If CPU pin has multiplexing option and selected as GPIO function, then the signal name is mentioned as
“GPIO (GPIO Number)”
Example: GPIO(GP4_1)
In this signal, GPIO is MUX functionality which we are using and GP4_1 is the GPIO number.
•
If CPU pin doesn’t have multiplexing option, then the signal name is mentioned as,
“Function n ame”
Example: USB0_DP
In this signal, functionality which we are using is USB0_DP
Note: The above naming is not applicable for other signals which are not connected to CPU.