iWave iW-RainboW-G22M, Hardware User'S Manual

Page: 31 / 62

REL1.2
Page 31 of 62
RZ/G1E SODIMM SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Pin
No.
SODIMM Edge Connector
Signal Name
CPU Ball Name/
Pin Number
Signal Type/
Termination
Description
86 MSIOF0_SYNC(GP4_5) MSIOF0_SYNC/
AB25 IO, 3.3V CMOS MSIOF0 frame synchronization for
transmission. Same signal can also work
as SYNC when a common synchronization
signal is used for transmission and
reception.
87 GPIO(GP1_25)
1
DACK0/MD21/
M2 IO, 3.3V CMOS/
100K PU General Purpose Input Output.
88 VIN_3V3 NA I, 3.3V Power Supply Voltage.
89 SSI_WS34(GP5_5) SSI_WS34/
AB6 IO, 3.3V CMOS SSI3/4 Word select.
90 SSI_SCK34(GP5_4) SSI_SCK34/
AD6 IO, 3.3V CMOS SSI3/4 Serial clock.
91 SSI_SCK4(GP5_7) SSI_SCK4/
AD22 IO, 3.3V CMOS SSI4 Serial clock
92 SSI_WS4(GP5_8) SSI_WS4/
AB21 IO, 3.3V CMOS SSI4 Word select.
93 ETH_TXD1/VI1_DATA5(GP
5_17) SSI_SCK9/
AE3 I, 3.3V CMOS VIN1 Parallel camera data 05.
Note: GP1_16 is optionally connected to
this pin through resistor and default not
populated.
94 SCIF1_TXD(GP4_15) SCIF1_TXD/
AC24 O, 3.3V CMOS SCIF1 Serial Communication Interface
Data Transmitter.
95 GND NA Power Ground.
96 HSCIF2_HSCK(GP0_10) D10/
E4 IO, 3.3V CMOS HSCIF2 High Speed Serial Communication
Interface clock (Or) General Purpose
Input Output.
97 SCIF1_RXD(GP4_14) SCIF1_RXD/
AD25 I, 3.3V CMOS SCIF1 Serial Communication Interface
Data receiver.
98 HSCIF2_HTX(GP0_9) D9/
A3 O, 3.3V CMOS Default NC.
HSCIF2 High Speed Serial Communication
Interface serial data transmitter.
Note: Same signal is connected to ON-
SOM Wi-Fi/BT module through resistor
and default populated.
99 HSCIF2_HRX(GP0_8) D8/
C4 I, 3.3V CMOS Default NC.
HSCIF2 High Speed Serial Communication
Interface serial data receiver.
Note: Same signal is connected to ON-
SOM Wi-Fi/BT module through resistor
and default populated.