IWAKI PUMPS Hicera V Series, Instruction Manual

Page: 8 / 32

- 6 -
1. Unpacking & Inspection
On unpacking the product, check the following points. If you find any problems, contact your near-
est distributor.
1. Check the information on nameplate (model code, flow rate, head and voltage) to see if the product is
delivered as per order.
2. Check for transit damage, deformation and loose bolts.
2. Product outline
The Hicera pump is a metering pump with ceramic wet ends such as a plunger, a cylinder and other
related parts.
The plunger reciprocates and rotates in the cylinder where liquid is taken in from a suction line and
then delivered to a discharge line.
1. The rotating plunger contracts to take in liquid
into the cylinder from a suction line as the duct on
the plunger passes the inlet.
2. The rotating plunger extends to let out liquid from
the cylinder to a discharge line as the duct on the
plunger passes the outlet.
Contraction
Plunger
Cylinder
IN OUT IN OUT
: Plunger reciprocation
: Plunger rotation
: Flow direction
Outline
Extension