IWAKI PUMPS Hicera V Series, Instruction Manual

Page: 10 / 32

- 8 -
4. Specification
50/60Hz
Outline
Model Gear ratio Speed (rpm) Max. flow
(ml/min)
Max.press.
(MPa)
Tube joint
(mm)
Standard
motor
Mass
(kg)
V-05SL1A5 1/150 9/11 1.6/1.9
0.7
ø6 SUS
tube joint
Induction
motor
100VAC 15W
2.3
V-05SL1B5 1/75 19/23 3.3/4.0
V-10�L1A5 1/150 9/11 6.0/7.0
V-10�L1B5 1/75 19/23 13/16
V-10�L1C5 1/30 48/58 33/40
V-10�L1D5 1/15 96/116 67/81
V-10�L2E5 1/7.5 193/232 135/163 0.6
ø10 SUS
tube joint
Induction
motor
100VAC 25W
3.0 V-10�L2F5 1/5 290/348 203/245 0.4
V-10�L2G5 1/3 483/580 338/409 0.3
V-15�S3E5 1/7.5 193/232 559/673 0.5
ø13 SUS
tube joint
Induction
motor
100VAC 40W
8.0 V-15�S3F5 1/5 290/348 841/1009 0.3
V-15�S3G5 1/3 483/580 1400/1682 0.2
● Either A: AL
2
O
3
/AL
2
O
3
or S: SiC/SiC comes in :
● Performance values in the above table are based on pumping clean water at ambient temperature.
● The revolution per minute is based on use of clean water and varies with liquid characteristics.
● Discharge capacity per revolution when the pump head is at an angle of 20º.
Approx. 0.17ml/rev for V-05
Approx. 0.7ml/rev for V-10
Approx. 2.9ml/rev for V-15
● The maximum suction lift with clean water is 4 meters and varies with liquid characteristics.
● Flush out crystallizing or adhesive liquid from the pump head after operation. Use of the pumps with flush-
ing ports is recommended.