IVT RHM-600, Manual

Page: 16 / 96

16
Instruction manual
EN
Never wet the device or spray water on it! •
Cleaning
Never use caustic agents to clean the plastic parts. •
At the end of your work, to prevent dust deposits you should •
use compressed air (max 3 bar) to clean out the ventilation
slots.
Carbon brushes
Check the carbon brushes regularly (dirty or worn carbon •
brushes result in excessive sparking and speed faults).
Only genuine replacement brushes specially designed for •
your tool should be used.
Both carbon brushes should be replaced at the same time. •
Use only identical carbon brushes.
Environmental protection
Recycle raw materials instead of disposing as
waste.
Tool, accessories and packaging should be sorted for
environment-friendly recycling.
The plastic components are labelled for categorized recycling.
These instructions are printed on recycled paper manufactured
without chlorine.