IVT CMS-110, Operating/Safety Instructions Manual

Page: 4 / 32

4
Manual instruction | Marble cutter
EN
Safety regulations for the use
This model row of the circular saw is intended for cut
and line concrete, stone and tile.
The machine is only suitable for right-hand use.
There is a possibility of a stationary installation of
the tool by use of some special accessories.
The devices, with their many-sided offer of
accessories, can be used among other things for
curves as well as cuts of a circle. You find in the
specialized trade or on our website our assortment
of accessories which allows an extensive application
for the use.
The following listed safety instructions should serve
you for the right use and for the protection of your
own safety. Therefore please read this very carefully.
When passing this device over to a third person,
these instructions must be handed out, too.
Please, read and take note of the following
comments that regard your protection against
electric shock and risk of injury and fire:
Verify that the power supply in your area is •
compatible with the voltage listed on the machine
Check the electric tools and electrical •
connections for any damage
Connect the power lead to the mains only with •
the tool turned off
Always turn on the tool before setting it against •
the piece you are working on
Adopt protective measures against electric •
shock. Avoid body contact with earthed parts,
such as metal pipes, radiators, cooking ranges,
refrigerators and the like
Large variations in temperature can lead to •
condensation on live part. Before use: Give the
machine time to adjust to the temperature of the
work area
Do not use machines, tools and recommended •
accessories for works other than those for which
they are designed!
Secure the workpiece. Use clamping devices ora •
vise to hold the workpieces securely
To avoid accidents, do not wear jewelery or loose •
clothing that could be caught up by moving parts.
It is recommended to wear protective footwear and
gloves. Long hair should be tied up
When dust, splinters or shavings area problem •
while working, or when working overhead, please,
wear protective eyewear and, if necessary, a
protective mask
In the case of loud noise, wear earprotection •
Be sure you always have safe footing, when •
working on floors, ladders and scaffoldings
Keep electric tools away from humidity and rain. •
Do not immerse
When working outdoors, only use approved •
tools and extension cables marked for outdoor use
Do not use the equipment in areas where danger •
of explosion exists
Only have repairs done by specialists using •
original parts
WARNING: The consumption of alcohol,
medication and drugs, plus states of
illness, fever and fatigue will affect your
ability to react. Do not use electric tools
in any of these situations.
Keep electric tools away from children •
Store electric tools in the original box in a safe •
place and out of the reach of children
When not in use, during breaks, when doing •
adjustment works, changing accessories or during
repair, always unplug the cable
Never carry the tool by the cable. Never unplug •
the tool by pulling on the cable
Make sure that all devices screening the saw •
blade are in perfect working order.
Make sure that the saw blade is screened •
correctly
Do not use diamond cutting blades which do •
not meet the specifications stated in this manual
Before sawing, remove all nails and other metal •
objects from the workpiece
Never start sawing before the saw reaches its full •
speed
The circular saw maybe removed from the •
workplace only after it is switched off and the
cutting blade has stopped
Never try to slow the saw blade down by exerting •
pressure on the side.
Make sure that the diameter of the internal •
flange lug corresponds with the internal opening of
the saw blade
Use only sharp, flawless saw blades. Replace •
immediately cracked, bent or dull saw blades
Direction of the arrow on the cutting blade must •
always match the direction of the arrow on the
circular saw protective case
Any removal of circular saw guard devices before •
sawing is forbidden
Damaged or faulty safety devices have to be •
replaced immediately
While sawing small workpieces that are too light •
to be securely positioned under their own weight,
clamping devices must be used.
Any sawing of asbestos-containing workpieces •