Iveco VECTOR 8, Technical And Repair Manual

Page: 137 / 206

Replace the filters with new parts, lubricate the seals slightly
with engine oil, hand screw and tighten for another 3/4 turn
(tighten whit tool 99368539).
Improper waste disposal is a threat for the
environment. Potentially hazardous waste used on
IVECO vehicles includes lubricants, fuels, coolants,
filters and batteries.
— Use watertight containers when draining off
fluids. Never use containers for foodstuffs or
beverages that can lead people to drink from
them.
— Never throw waste on the ground, on tips or
in water courses.
— Obtain information on the appropriate ways
of recycling or disposing of waste from the
local authorities or collection centres.
Use only genuine products, capable of extending
the efficiency and life of the engine.
After fitting the filters, check the sump oil level and turn the
engine for a little while.
Stop the engine, wait for roughly ten minutes and check the
oil level again.
Top up as necessary.
Figure 2
NOTE
103184
SECTION 3 - INDUSTRIAL APPLICATION
85
VECTOR 8 ENGINES
Print P2D32V001E Base - April 2006