Iveco Stralis MY 2016, Body Builder Instructions

Page: 218 / 254

54
NEW STRALIS MY2016
‒
GUIDELINES FOR BODYBUILDERS
ELECTRONIC SUB-SYSTEMS
5.10
MISCELLANEOUS
–
Printed 692.68.697
–
5 Ed. - Base 03/2019
Pin Description
Cable
code
Max.
Load
Connected to Remarks
2
Key activated positive
connected to fuse for EBS
/ speed limiter
8847 10 A 75000-A8 / F8
3 Ground 0000 10 A Ground
4 Ground 0000 30 A Ground
5 Trailer EBS fault signal 6671 BCM E22 Inlet of the BCM control unit with dry current of the 10 mA contact.
6 CAN H line WS/Bi EBS X3-2 Connected to EBS control unit
7 CAN L line GN/Ve EBS X3-4 Connected to EBS control unit
e) Side marker light installation (Side Marker Lamps)
EC regulations require that vehicles are provided with side and clearance lights when the total length exceeds 6 m.
Installation of the side lights must be carried out on the additional structures (containers, vans, etc.), while the electric power supply
is obtained by the specific connectors ST77 and ST78 on the chassis (trucks only).
Below is an illustration of the position for these terminals.
Note It is not possible to draw current from side marker lights.