Iveco Stralis MY 2016, Body Builder Instructions

Page: 150 / 254

12
NEW STRALIS MY2016
‒
GUIDELINES FOR BODYBUILDERS
POWER TAKE-OFFS
4.5
POWER TAKE-OFF FROM ENGINE
–
Printed 692.68.697
–
5 Ed. - Base 03/2019
Max. torque available depending on engine speed
245780
Figure 5
A. CURSOR 9 B. CURSOR 11/13
A) Vehicle stationary - PTO mode ON
●
The maximum torque take-off is permitted at engine speeds exceeding 1100 rpm.
B) Vehicle running - PTO mode ON
●
No torque limitation available in relation to rpm.
●
The engine idle speed is set at 800 rpm (CURSOR 9) or at 700 rpm (CURSOR 11/13).
●
The air supply system pressure for PTO clutch engagement must exceed 8.5 bar.
When the maximum permitted torque take-off is required, the moment of inertia of the connected rotating masses (including the
drive shaft) must not exceed 0.03 kgm 2 .
Once the maximum admissible value for the inertia has been exceeded, a flexible coupling needs to be applied the technical spe-
cifications of which are to be requested directly from IVECO.