Page 5
Operation and maintenance
NEW EcoHeater
DSEH200301.01.EN
Continuous product development may give rise to specification changes without notice.
2 General
2.1 Intended use
The EcoHeater extract air heat pump is intended for energy recovery from the
extract air in apartment blocks.
When installed indoors, the air handling unit must be installed in an area that
maintains a temperature b7 and +30°C, and with a moisture content of
<3.5 g/kg in the fan room in winter. The unit can also be equipped for installation
in cold attics or outdoors.
Any other use and installation in other environments are prohibited unless spe-
cifically permitted by IV Produkt AB.
2.2 Manufacturer
The EcoHeater extract air heat pump is manufactured by:
IV Produkt AB
Sjöuddevägen 7
SE-350 43 VÄXJÖ
2.3 Designations
The EcoHeater extract air heat pump comprises two sections, a fan section and
compressor section, as well as a possible combustion gas bypass.
Each section has a model identification label placed on the front.
The model type plate shows the series number and the requisite designations to
identify the section.
Kodnyckel
Code key
Beteckning
Project name
Ordernummer
Order number
Max. varv
Max. rev.
Tillv. ort
Made in
Tillv. månad
Manuf. month
Y Y M M
Modell
Model
–
–
Max. temp.
°C
r/m
Art. Nr. 19121-1001
Typical model identification label
