9
Dual Phase+ Power Supply
5100636 Rev. F
6. TROUBLESHOOTING
1. For safety and proper operation, Simco-Ion’s static neutralizers must be
connected to Simco-Ion power supplies as supplied by the factory to operate.
Standard line voltage is converted to an output of approximately 4000 volts
AC. In the event of a direct short circuit to ground at the output of power, the
output current is limited to a maximum of 5 mA.
2. Precautions must be taken to avoid contacting the output of the Power Supply,
the inner conductor of the high voltage cable, and the emitter points of the
Simco-Ion Static Neutralizer. These points must be shielded and interlocked
to prevent personnel contact with high voltages. Failure to do so may result in
danger of electrical shock to personnel.
7. MAINTENANCE
Occasionally check to make certain that all ground and electrical connections are
clean and tight. Periodically inspect all cables and wiring to ensure that there are
no cuts, abrasions, or damage that can lead to operator shock or equipment damage.
8. WARRANTY
This product has been carefully tested at the factory and is warranted to be free
from any defects in materials or workmanship. Simco-Ion will, under this warranty,
repair or replace any equipment that proves, upon our examination, to have become
defective within one year from the date of purchase.
The equipment being returned under warranty should be shipped by the purchaser
to Simco-Ion, 2257 North Penn Road, Hatfield PA 19440, transportation prepaid
and insured for its replacement cost. Prior to returning any goods for any reason,
contact Simco-Ion Customer Service at (215) 822-6401 for a Return Authorization
Number. This number must accompany all returned items.
This warranty does not apply when the equipment has been tampered with, misused,
improperly installed, altered, has received damage through abuse, carelessness,
accident, connected to improper line voltage, or has been serviced anyone other than
an authorized factory representative.
The warranty does not apply when Simco-Ion parts and equipment have been
energized by other than the appropriate Simco-Ion power supply or generator,
or when a Simco-Ion power supply or generator has been used to energize other
than Simco-Ion parts and equipment. Simco-Ion makes no warranty, expressed or
implied, nor accepts any obligation, liabilities, or responsibility in connection with
the use of this product other than the repair or replacement of parts stated herein.
