EC-Manufacturers Declaration
(only valid for pump)
acc. to
Machine Directive 98/37/EG Appendix II B
of European Parliament and Council of 22
nd
June 1998.
Manufacturer:
Pumpenfabrik ERNST VOGEL GmbH
A-2000 Stockerau, Ernst Vogel-Strasse 2
Products:
Pumps of model
LSN, LSNI, LSNH, LSNIH
The mentioned products are intended
for
Installation into a machine
1)
/ Assembly with other machines
1)
. Their putting
into operation is forbidden so long, till it is proven, that the machine, in which the pump shall be integrated,
corresponds with the regulations of the
Machine Directive 98/37/EG
.
Used harmonised norms, especially
EN 809
EN ISO 12100 part 1
EN ISO 12100 part 2
Used national technical norms and specifications, especially
DIN 31001
The Declaration of the Manufacturer expires, when the pump is installed into units, where no declaration of
conformity, acc. to the
Machine Directive 98/37/EG,
is existing.
Stockerau, 22.05.2003
................................................................................................
Robert Salzbauer
Quality control
1)
Strike out what´s not the case
EC-Declaration of Conformity on customer buyouts
If essential components of the unit (e.g. motors) are provided by the customer and only the assembly of
these components is made by Vogel, the whole conformity must be proved by the customer!
