Itronix GoBook (IX250) User Manual Download

Page: 116 / 153

102

GoBook Users Manual

77-0100-001 12 September 2000

What to Try First

This section is designed to help you determine and fix problems you might encounter while operating the GoBook
computer. Try the following things in order:

•

First look through the categories in this section for a solution.

•

If you don’t find a solution for your situation here, try one of the resources listed below.

•

If you are having a problem with a computer application, use the online Help that comes with the application
to find a solution.

•

If you still cannot resolve your problem, contact the help desk at your organization.

For More Help

•

Windows 98 online Help is already installed on your system. To access this information, select Help from the
Start Menu.

•

Third-party Windows manuals are available from your local bookstore.

Summary of Contents for GoBook (IX250)


























































































































































Search results

Summary of Contents for GoBook (IX250)

Reviews:

Related manuals for GoBook (IX250)

Brands by name

Popular brands

Itronix GoBook (IX250), User Manual

Search results

Summary of Contents for GoBook (IX250)

Reviews:

Related manuals for GoBook (IX250)

Brands by name

Popular brands