manualshive.com logo in svg

Itronix GoBook (IX250), User Manual

Share
Download
Itronix GoBook (IX250) User Manual Download Page 41

27

Section 2. Getting Familiar with Your Computer

77-0100-001   12 September 2000

Scrolling Buttons

If you are scrolling through a document, you may find that using the scrolling button is more restful to your hand
than holding down a mouse button. The scrolling button is located between the touchpad buttons. Push the top of the
button to scroll up in a document or Web page; press the bottom of the button to scroll down in a document or Web
page.

Connecting an External Keyboard or Mouse

You can use your GoBook computer with an optional external keyboard, numeric keypad, or IBM PS/2 compatible
mouse. The devices are “hot swap” capable, which means you do not have to power down the GoBook to connect
these devices to the PS/2 connection located on the back of the unit.

Disk Drives

Your computer comes with several components for reading and writing (recording) information.

The Hard Disk Drive

The hard disk provides high-capacity storage and fast access. Windows and most programs are stored here. Your
GoBook identifies the hard disk drive as drive C.

Summary of Contents for GoBook (IX250)


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands