manualshive.com logo in svg

Itronix GoBook (IX250), User Manual

Share
Download
Itronix GoBook (IX250) User Manual Download Page 90

76

GoBook™ User’s Manual

77-0100-001   12 September 2000

PRECAUTIONS

•

There are no user-replaceable parts within the vehicle cradle, so do not open the cradle case. The vehicle
cradle is internally protected. It resets automatically if there is a power fault.

•

Do not use the vehicle cradle to charge the computer battery overnight. Turn off the vehicle cradle at the end
of each work day to prevent draining the voltage in your vehicle’s battery below starting levels.

Charging Batteries

The vehicle cradle is designed to charge the computer’s battery with voltage from the vehicle battery while you are
traveling between customer jobs. Follow the procedure below to charge a battery.

To charge a battery installed in the computer

1 Make sure the computer is powered off.

2 Place the computer onto the vehicle cradle, making sure it is securely latched.

Summary of Contents for GoBook (IX250)


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands