manualshive.com logo in svg

Itronix GoBook (IX250), User Manual

Share
Download
Itronix GoBook (IX250) User Manual Download Page 22

8

77-0100-001   12 September 2000

GoBook™ User’s Manual

Turning the Computer On and Off

You can operate the computer while the battery is charging, or on external power.

To turn on the computer

•

Press the 

ON

/

OFF

 button once, and then give the system time to respond.

To turn off the computer

1 From the Start menu, click Shut Down.

2 Select the Shut Down from the Shut Down Windows screen, then click OK.

If you need to leave the system for a short time, or if you want to conserve battery power, you can suspend the
computer by pressing FN + F3, see Section 5  Power Management for additional information.

Add Note defining Suspend to Ram vs Suspend to Disk here!

CAUTION  Shutting down the computer improperly could result in lost or corrupted data.

Adjusting the Volume

Volume for the computer is adjusted by using function key combinations.

•

FN + F8 increases the volume

•

FN + F9 decreases the volume

•

FN + F10  mutes the volume

You can also adjust the volume with the Windows volume control applet, which is located on the taskbar. 

NOTE  Adjusting the volume using the function keys produces only a slight change with each press.  It may take
several presses to increase or decrease the volume to a level that you desire.

Summary of Contents for GoBook (IX250)


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands