SYNTHESIZED SETS
USER MANUAL
34
The scanning process lasts around half a minute. Once it has ended leds will no longer realize this
visualization and free channels will be shown. These channels are the result of the current scanning
process plus any other scanning processes undergone while the equipment is in rest from the latest
reset (last time the receiver has been given power supply).
The channels will be indicated though leds
and using the same systems as to indicate the
working channel. Free channels will be indicated sequentially, separated by a flash in which all led a
will light.
The order is as follows:
• The first channel shown will be the smallest free one.
• 11 units will be added to the next channel to be shown (always that the band may allow it).
• If the result is superior than the channels in the band, the maximum of channels in the band may
be subtracted.
• If the channel is not free, it is not shown and next one with the same order is shown.
In order the user may understand it better, find below an example of visualization of the band
868MHz:
•
In case all channels were free, the result may be as follows:
1
►
12
►
23
►
34
►
45
►
56
►
67
►
78
►
8
►
19
►
30…
•
In case the channels may be occupied, the results may be as follows:
1
►
12
►
45
►
56
►
67
►
78
►
19
►
30…
The visualization of channels may be cyclic and it will end once the last free channel is found, the
equipment is set up or a manual scanning may be commanded.
Summary of Contents for BETON
Page 1: ...USER MANUAL SYNTHESIZED SETS...
Page 2: ......
