SYNTHESIZED SETS
USER MANUAL
29
6. MAINTENANCE OF RADIO CONTROL EQUIPMENT
The equipment you have purchased is manufactured using top quality materials ensuring perfect
working order and operation of the remote control. Similarly to all machinery or equipment, the remote
control requires minimum basic maintenance tasks that should be performed. In order to increase the
life span of the apparatus and avoid unnecessary repair costs, we advise you to carefully follow these
preservation and maintenance recommendations.
- Do not knock the set.
- Use the fastening accessories and shoulder strap suitably and adjust them so that using the set
is comfortable and safe.
- Although the set has a high level of water tightness (IP65), it should not be totally or partially
submerged and should not be left in the rain.
- It is recommended not to leave the set exposed to the sun.
As a general rule, it is advisable to periodically service the sealing devices that protect both the
receiver and transmitter from weathering. Servicing should be carried out by an ITOWA authorised
Technical Assistance Service, as incorrect sealing may cause irreparable damage to the equipment.
6.1. MAINTENANCE OF THE TRANSMITTER
ATTENTION:
BEFORE HANDLING THE TRANSMITTER, TURN OFF THE GENERAL
SWITCH OF THE MACHINE.
The transmitter requires minimum maintenance. The good condition of the transmitter should be
checked paying special attention to joints and rubber protections of the push-button, selectors or
joystick. They should be replaced immediately if they have been cut or damaged as a result of
incorrect use of the apparatus.
Check the contacts of the battery holder ensuring that they are clean and free of rust, and that the
spring return force is correct.
ATTENTION:
DAMAGED RUBBER OF PUSH BUTTONS SHOULD BE REPLACED
IMMEDIATELY, OTHERWISE WATER MAY DAMAGE THE TRANSMITTER.
Summary of Contents for BETON
Page 1: ...USER MANUAL SYNTHESIZED SETS...
Page 2: ......
