13
∅15
54
□
80
□
80
10
a
c
f
b
e d
a: Hexagon Socket Head Cap Screw DIN 912 M6x45
for connecting to a Timing-Belt Reverse Unit
b: Hexagon Socket Head Cap Screw DIN 912 M6x60
c: Hexagon Socket Head Cap Screw DIN 912 M5x12
d: Hexagon Socket Head Cap Screw DIN 912 M6x16
e: Hexagon Socket Head Cap Screw DIN 912 M4x16
f: Expanding hub coupling D40/D15
Connecting Drive Set 8 D40/D15 AP/WP 60 – 0.0.672.73
Drive Set 8 D40/D15 AP/WP 60 (0.0.672.73) is used solely to connect item
drives to Linear Unit LRE 8 D14 ZU 40 R25. The Drive Set is fully prepared for
installation on the corresponding Linear Unit. The drive shaft transfers drive
torque without backlash. Hexagon Socket Head Cap Screws DIN 912 M6x60
are supplied with the Drive Set for this purpose and are screwed through
the housing of the Drive Unit and into the Coupling Housing of the Drive Set.
Tightening torque: T = 14 Nm
The torques transferred by the clamp connection factor in the maximum
mating play for the shaft fits: Shaft k6 / hole H7.
Force is transferred from the Coupling to the drive shaft by means of frictional
resistance. The Shaft and the hole in the coupling hub must be degreased and
cleaned to ensure the frictional resistance is effective. Hexagon Socket Head
Cap Screws must be secured against working loose.
Next, use the Gearbox Centring Piece to fasten the Gearbox flush on the
Adapter Plate of the Drive Set. Use Hexagon Socket Head Cap Screws DIN
912 M5x12 for this purpose. Hexagon Socket Head Cap Screws DIN 912
M4x16 are included in the Drive Set for the purpose of fastening the Motor to
the Gearbox.
