10
⌀10.5/5
40
19
44
19
⌀5.5
40
20
21
21
Fastening arrangement of Timing Belt Reverse Unit 8 40 R25 on different
profiles depending on the position of the Timing Belt when fed back through.
Attachment options
Next, fasten the Timing-Belt Reverse Units to the support profile and align the
Timing Belt with the profile.
Securing and tensioning Timing Belt R25 T10
To secure and tension the Timing Belt on a guide carriage, you will need to fit
a Timing-Belt Tensioner, Tensioning Block and a Timing-Belt Tensioner, Fixing
Block 8 R25 in the correct width at each end of the Timing Belt.
The corresponding grooves and fastening materials are provided on Slide LRF
for the purpose of fixing the tensioning elements in place. When working with
high loads, the Tensioning Blocks 8 and Fixing Blocks 8 need to be pinned
(Dowel Pin ISO 2338, ⌀ 6 mm). The prepared ⌀ 5.5 mm holes determine the
position of the Dowel Pins.
Connecting Timing Belt Reverse Unit 8 40 R25 to Line 8 profiles
(construction height 80 mm and over).
Separating the special T-Slot Nut at the pre-determined breaking point.
Timing-Belt Tensioner, Fixing Block 8 R25, 0.0.426.30
Timing-Belt Tensioner, Tensioning Block 8 R25, 0.0.426.29
