Itel STL-SAT Changeover, User Manual

Page: 52 / 57

52 STL-SAT Changeover
© 2018 ITEL SNC
19: noise level, audio level and PI code
20: noise level and incoming RDS quality
21: noise level, audio level and RDS input quality
22: noise level, PI code and incoming RDS quality
23: noise level, PI code, audio level, and RDS quality
24: noise level, pilot level
25: noise level, pilot level and audio level
26: noise level, pilot level and PI code
27: noise level, pilot level, audio level and PI code
28: noise level, pilot level and incoming RDS quality
29: noise level, pilot level, audio level and RDS input quality
30: noise level, pilot level, PI code, and incoming RDS quality
31: noise level, pilot level, PI code, audio level and RDS quality
32: Dropouts
33: Dropouts and audio level
34: Dropouts and PI code
35: Dropouts, Audio Level and PI Code
36: Dropouts, incoming RDS quality
37: Dropouts, Audio Level, and RDS Incoming Quality
38: Dropouts, PI code and incoming RDS quality
39: Dropouts, PI code, audio level, and RDS quality
40: Dropouts and Pilot Levels
41: Dropouts, pilot level, and audio level
42: Dropouts, Pilot level and PI code
43: Dropouts, pilot level, audio level and PI code
44: Dropouts, Pilot Level, and RDS Incoming Quality
45: Dropouts, Pilot Level, Audio Level, and RDS Incoming Quality
46: Dropouts, pilot level, PI code, and incoming RDS quality
47: Dropouts, Pilot Level, PI Code, Audio Level, and RDS Quality
48: Dropouts and noise level
49: Dropouts, noise level and audio level
50: Dropouts, noise level and PI code
51: Dropouts, noise level, audio level and PI code
52: Dropouts, noise level and incoming RDS quality
53: Dropouts, noise level, audio level, and incoming RDS quality
54: Dropouts, noise level, PI code, and incoming RDS quality
55: Dropouts, noise level, PI code, audio level, and RDS quality
56: Dropouts, noise level, pilot level
57: Dropouts, noise level, pilot level, and audio level
58: Dropouts, noise level, pilot level and PI code
59: Dropouts, noise level, pilot level, audio level and PI code
60: Dropouts, noise level, pilot level, and incoming RDS quality
61: Dropouts, noise level, pilot level, audio level, and incoming RDS quality
62: Dropouts, noise level, pilot level, PI code, and incoming RDS quality
63: Dropouts, noise level, pilot level, PI code, audio level, and RDS quality
If a topic is not specified, the device will respond by listing the valid values list and a brief description.
Sending an AUTO 0 command is equivalent to the MAN command.
Example: AUTO <space> 3 sets the exchange on the audio and PI level of the incoming RDS signal.
The unit will respond with the status message:
STATION NAME
<CMD_TELNUM>
Mode:Audio+PI