Itel STL-SAT Changeover, User Manual

Page: 14 / 57

14 STL-SAT Changeover
© 2018 ITEL SNC
1.7 Password
Parameter editing is password protected, therefore, at the first attempt to modify any of the parameters,
the access code request window will be displayed
Default Code is "0000".
Once the access code has been entered, place on the "ENTER" element, which will start blinking, and press
the ENT key on the front panel.
At this point you will be redirected to the window within which you were doing the editing operation.
The unit will automatically return to lock status after 2 hours from the last push of a button or
immediately with the "LOCK" function.