Itel STL-SAT Changeover, User Manual

Page: 57 / 57

57 GSM - SMS Functions
© 2018 ITEL SNC
Ds: 2.0: persistent data structure version
Hw: 1.0: Hardware version
Output: Ok (BYPASS!): Audio output status. If BYPASS! Is displayed, the output has been switched
on the MPX input.
Subsys: Ok (FLT): RDS / slave controller decode state. If FLT is displayed, the system is defective.
DSP: Ok (FLT): DSP status. If FLT is displayed, the system is malfunctioning
PwSupply: Ok (FLT): Power Supply Status. If FLT is displayed, the power supply is damaged.
4.1.15 SWAP
Exchange primary audio sources and backups.
Each command sent will match the previous status reversal, so if the SWAPCHANS mode has already been
enabled, it will be disabled and vice versa.
Syntax
SWAP
When the command is executed, a status SMS is sent
STATION NAME
<CMD_TELNUM>
SWAP
Mode:Audio+PI
Onair:FILT
Main:FILT
Back:STE
MpxIn Qlt:100
MpxIn PI:5432
MpxIn Lev:92
AudioIn L:80
AudioIn R:95
The added "SWAP" string indicates that SWAPCHANS mode has been activated.