34
STL-SAT Changeover
© 2018 ITEL SNC
3.2.3
Coder Stereo Settings
PILOT LEVEL KHz:
pilot carrier setting
PILOT PHASE:
Pilot carrier phase setting
INPUT GAIN:
Input gain setting
CLIPPER:
enable the clipper in order to contain the audio peaks.
PREEMPHASIS:
pre-emphasis enabling.
3.2.4
Channels and Threshold Settings
Impostazioni scambio:
In this section you can make the settings of the modes, times and exchange thresholds. For descriptions
of these, refer to the relative front panel configuration windows.
Use STL RDS when on L / R input: By setting this flag, you can have the RDS stream received from the MPX
input even when the L / R channel is aired. (available from "STL RDS on SAT: 0/1" display in the "Override"
window).
3.2.4.1
Alarms Settings
Push button
it will open the following window useful for managing
exchange modes, configurable and activated through Flags:
Summary of Contents for STL-SAT Changeover
