Integral
Operation Function
Copyright © Itech Electronics Co., Ltd.
30
interface.
3. When you need to keep the current integral status and integral result, you
can press the soft key corresponding to the “RUN HOLD” parameter. Then
the current status of the integral result display and communication output
will be kept no matter whether integral operation is running.
4.
When you need to continue to implement integral operation, double-press
the soft key corresponding to the “RUN HOLD” parameter to exit the HOLD
status. The power meter will display the integral result after exiting the
HOLD status. The schematic diagram of display of the HOLD/RUN integral
result is shown below.
5. When you need to suspend integral operation, press the soft key
corresponding to the “Stop” parameter to suspend integral operation.
6. Press the soft key corresponding to the “RESET” parameter to reset the
integral value and integral time. The relationship diagram of start,
suspension and resetting of the integral operation status is shown below.
Auto Clear: when ON is selected.
Auto Clear: when OFF is selected.
