Basic
Measurement Functions
Copyright © Itech Electronics Co., Ltd.
17
information can be set.
3. When the soft key corresponding to “FUNC” is pressed, the measurement
function can be selected. For example, when the “FUNC” key is pressed
once, the displayed measurement function will be switched once in the
W/I/V sequence. Different measurement parameters are displayed when
different functions are selected. As power measurement is taken as an
example in this operation, P is selected.
P (power): P, Q, S, PF
, φ and Fsyn
I (current): Irms, Imn, Irmn, Idc, Iac, Ipk+, Ipk-, Ipp, Icf,
fI
and Irush
U (voltage): Urms, Umn, Urmn, Udc, Uac, Upk+, Upk-, Upp, Ucf and
fU
4. Press the “
” key and move the cursor to select the parameter
displayed in the interface (blue font background). Press the right soft key
corresponding to the parameter to adjust the parameter displayed at
present. P, Q, S and PFare set in sequence.
NOTE
When the soft key corresponding to the parameter is pressed once, the parameter will be
selected in sequence.
5. You can also press the “INSERT PAGE” to add a display page. At most five
pages are allowable. Press the “DELETE PAGE” to delete the display page.
At least one page should be left.
