Integral
Operation Function
Copyright © Itech Electronics Co., Ltd.
24
Description of information of integral measurement interface:
Parameter name
Parameter descriptions
U_RANGE
Voltage range setting: press the soft key corresponding
to this parameter to set the voltage range.
I_RANGE
Current range setting: press the soft key corresponding
to this parameter to set the current range.
RUN/HOLD
Run/hold: press the soft key corresponding to this
parameter to run or hold the integral function.
RESET
Reset.
FUNC(WP/q/AV)
Selection of the integral function: active power integral
(WP), current integral (q) and average active power
integral (AV).
LARGE(WP/WP+/WP
-, q/q+/q-, WPAV)
Selection of the item to be displayed in a amplified
manner: WP (watt hour, the sum of positive and minus
watt hours), WP+ (the consumption of positive watt
hours), WP- (the negative watt hours of feedback
power), q (ampere hour, the sum of positive and
negative ampere hours), q+ (the consumption of
positive ampere hours), q- (the negative ampere hours
of feedback power) and WPAV (average active
powerintegral).
START
Integral Start key In the manual start mode, the integral
function can be enabled by pressing the soft key
corresponding to this parameter.
STOP
Integral Stop key In the manual stop mode, the integral
function can be disabled by pressing the soft key
corresponding to this parameter.
SETUP
Set relevant parameters of integral measurement.
