Introduction
Copyright © Itech Electronics Co., Ltd.
3
Key tag
Name and function
Up/Down key and Left/Right key
List Edit: those lines which are not displayed can be displayed by
operating the Left/Right key. Those rows which are not displayed
can be displayed by operating the Up/Down key.
Menu Edit: the programming items can be rolled by operating
the Up/Down key. Prompts of corresponding options are
displayed on the right and options can be selected via the soft
key.
Digit Edit: the programming items can be rolled by operating the
Up/Down key. The digit to be edited is selected by operating the
Left/Right key or via the knob. Carrying can be completed
automatically.
Soft key The contents on the left of the key and the menu
function displayed above the key on the display screen may be
subject to changes.
Knob key, used for setting the value indicated by the cursor,
selecting the voltage and current range, adjusting the waveform,
etc.
1.4 Introduction of Menu Function
Press this
key to enter the system menu function. Menu is described as
follows.
Menu
Menu setting
SYSTEM
SYSTEM INFO
Instrument system
information
Model
Instrument model
Serial
Instrument SN
Cpu Version
The version of CPU
Dsp Version
The version of Digital Signal Processing
MAC address
Network hardware address
Socket Port
Port number
COMM CONFIG
Communication
configuration
R232
BAUD Rate
Set the communication baud
rate:4800/9600/19200/38400/57600/115200
Parity Chack
Communication parity check bit: Default:
NONE
Data bit
Communication data bit: 8 (default)
Stop bit
Communication stop bit: 1 (default)
USB
Type B Connect
Select the USB communication interface.
GPIB
GPIB Address
The address is adjustable between 1 and 30.
LAN
IP mode
IP mode: MANU/DHCP
IP Address
IP address setting
Subnet mask
Set the subnetmask.
Gateway
Set the gateway.
