Input Commands
Copyright © Itech Electronic Co., Ltd.
34
Syntax
INPut:SDS:ENABle <0|OFF|1|ON>
Arguments
<0|OFF|1|ON>
Default value
1
Example
INP:SDS:ENAB 0
Returns
0|1
INPut:SDS:DC:RELay <0|OFF|1|ON>
This command is used to open or close the main circuit DC relay, 0 indicates
open, 1 indicates close.
Syntax
OUTPut:SDS:DC:RELay <0|OFF|1|ON>
Arguments
<0|1|OFF|ON>
Default value
ON
Example
OUTP:SDS:DC:REL 0
Returns
0|1
Query syntax
OUTPut:SDS:DC:RELay?
INPut:SDS:SENSe:RELay <0|OFF|1|ON>
This command is used to switch the SDS relay to local measurement or remote
sense. 0 indicates local measurement. 1 indicates remote sensing.
