3. CONFIGURATION.
USER'S MANUAL
WATER CONTROLLER 3000
Activation mode of a mixer
Manual (MAN): It only activates if it is activated in the irrigation program. It´s not linked to the fertirrigation program.
Previous fertirrigation (PRE): if the fertirrigation program activates the pump linked to the mixer, in the pre irrigation
time the mixers will be activated the time programmed. If the time of the mixer is higher than the pre irrigation time,
mixer working time will overlap with the fertirrigation time.
Continuous (CON): if the fertirrigation program activates the dosing pump linked to the mixer, the mixer will be activated
in pre irrigation time and irrigation time.
Discontinuous (DIS): if the fertirrigation program activates the dosing pump linked to the mixer, the mixer will be
activated in the pre irrigation and irrigation time in a discontinuous working time. It will depend on the time (minutes),
and frequency (hh:mm) programmed.
NOTE: In the post irrigation time, all the mixers are off.
MIXERS
1. -- - - - - - - -: - -
2. 12 MAN - - - -: - -
3. 15 PRE 01 - -: - -
4. 16 CON - - - -: - -
5. 17 DIS 01 00:10
6. -- - - - - - - -: - -
3.5. EXTERNAL ACTIVATION OF AN IRRIGATION PROGRAM
For an external activation of an irrigation program it´s required to use the inputs of the module 2. One program for each
input.
CONFIG
PUMPS
FILTERS
MIXERS
EXPRESS PROGRAM
WATERING FACTOR
SET UP
CONFIG
PUMPS
ENT
CONFIG
FILTERS
MIXERS
EXPRESS PROGRAM
PUMPS
SET UP
WATERING FACTOR
EXPRESS PROGRAM
INPUT 1:
INPUT 2: 10
05
WATER 3000 module
SMART DROP TECHNOLOGY
RCP/PCPM 3500
ESC
ENT
CONTROL
STOP
CONTROLLER 3000
TRANSPARENT
FORAT
CALIBRACION
STOP
CONTROL
WATER 3000 module
SMART DROP TECHNOLOGY
WATER 3000 module
SMART DROP TECHNOLOGY
WATER 3000 module
SMART DROP TECHNOLOGY
Console
Module 1
Module 2
Module 3
Module 4
Out 1 ... 24
Out 25 ... 48
Out 49 ... 72
Out 73 ... 96
2
1
3
2
1
3
In this example, when activating input 1, irrigation program 5 is activated.
12
