85
Cylinder
No.
1 2 3 4
Valve arrangement
E
I
E
I
E
I
E
I
When No. 1 cylinder is at TDC
in the compression stroke
○ ○
○ ○
When No. 4 cylinder is at TDC
in the compression stroke
◎
◎
◎ ◎
I: Intake E: Exhaust
4) On completion of the valve clearance adjustment in 3) above, make
mark alignment as in 1) above by giving a turn to the crankshaft in
normal direction.
Then measure and adjust the clearance of the other valves.
CAUTION:
The rocker arm is made of die-cast aluminum. Therefore, be
careful not to tighten the adjusting screw to excess.
Type II method with two aligning marks at point 180 degrees apart on
the outside diameter of the crank pulley.
Summary of Contents for AU-4LE1T
Page 25: ...20 Engine model Serial number 4LE1 000000 IMLE0092...
Page 63: ...58 4LE1T Oil drain plug Oil filler cap Oil filler cap Oil level gauge IMLE0094...
Page 64: ...59 4LE1NA Oil drain plug Oil filler cap Oil filler cap Oil level gauge IMLE0095...
Page 79: ...74 C O OPEN Lever Element Cup Drain plug Ring nut Air bleeder plug CLOSE IMLE0059...
