45
4. CARE IN THE ENGINE OPERATION
In the engine operation, always pay attention to the following items if the
engine indicates any sign of abnormalities.
(1) Engine
Oil
Pressure
Engine oil pressure is normal when the oil pressure gauge shows the
values of the following in the engine warmed-up condition.
Oil pressure : 147 kPa (21 psi) /1000min
-1
294 kPa (43 psi) /1800min
-1
343 to 686 kPa (50 to 100 psi) /2200min
-1
In the continuous engine operation, engine oil pressure is slightly lower
than the pressure at start-up time.
Also, make sure that the oil warning lamp is off.
If, in continuous engine operation, the engine oil pressure warning
lamp is off, engine oil pressure is normal.
When the engine oil pressure gauge shows the following abnormal
conditions, stop the engine immediately and check the engine oil
amount in the oil sump and oil leakage:
•
The engine oil pressure gauge shows below 200 kPa (28 psi)
though the engine speed is raised.
•
The oil pressure gauge indicator oscillates greatly in the engine
low speed range.
•
When the engine oil pressure warning lamp goes on and off
repeatedly.
When not lack of engine oil or no oil leakage is found, contact your
equipment supplier to determine the cause of the abnormal reading.
Summary of Contents for AU-4LE1T
Page 25: ...20 Engine model Serial number 4LE1 000000 IMLE0092...
Page 63: ...58 4LE1T Oil drain plug Oil filler cap Oil filler cap Oil level gauge IMLE0094...
Page 64: ...59 4LE1NA Oil drain plug Oil filler cap Oil filler cap Oil level gauge IMLE0095...
Page 79: ...74 C O OPEN Lever Element Cup Drain plug Ring nut Air bleeder plug CLOSE IMLE0059...