61
Oil filter element installation
1) Apply lightly engine oil to the O-ring.
2) Turn in new cartridge until its sealed face comes in contact with
the O-ring.
3) Use a filter wrench to further turn in the cartridge.
Oil filter element tightening torque : 14.7 – 20.6 Nm (1.5 – 2.1 kgm)
Engine oil refilling
1) Disconnect the oil drain hose and reinstall the cap of drain cock. (One -
touch type)
Install the drain plug. (Drain plug type)
2) Fill with new engine oil by the oil filler port.
Wait about fifteen minutes until the oil gets down to the oil pan.
Then check the oil level with a dipstick.
Do not insert the dipstick by force. The dipstick may be broken.
WARNING:
1. In adding oil, take care not to spill it. If you spill oil, wipe it
properly, or this could lead to a fire.
2. Do not leave any flammables such as cloth or gloves in the
engine compartment. It may result in a fire.
IMWG0034
Summary of Contents for AU-4LE1T
Page 25: ...20 Engine model Serial number 4LE1 000000 IMLE0092...
Page 63: ...58 4LE1T Oil drain plug Oil filler cap Oil filler cap Oil level gauge IMLE0094...
Page 64: ...59 4LE1NA Oil drain plug Oil filler cap Oil filler cap Oil level gauge IMLE0095...
Page 79: ...74 C O OPEN Lever Element Cup Drain plug Ring nut Air bleeder plug CLOSE IMLE0059...
