background image

 

2

C A U T I O N 

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN 

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES   

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE   

OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 

 

IMPORTANT SAFETY INSTRUCTIONS 

1.) Read 

these 

instructions. 

2.) Keep 

these 

instructions. 

3.) Heed 

all 

warnings. 

4.)  Follow all instructions. 
5.)    Do not use this apparatus near water. 
6.)  Clean only with dry cloth. 
7.)  Do not block any ventilation openings. Install in accordance with the manufacturer’s 

instructions. 

8.)  Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat. 

9.)  Do not defeat the safety purpose of the plug. If the provided plug does not fit into your outlet, 

consult an electrician for replacement of the obsolete outlet. 

10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the apparatus. 

11.)  Only use attachments / accessories specified by the manufacturer. 
12.)  Unplug this apparatus during lightning storms or when unused for long periods of time. 
13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus 

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has 
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been dropped. 

14.) This appliance shall not be exposed to dripping or splashing water and no object filled with l
 

liquids such as vases shall be placed on the apparatus. 

15.)  Do not overload wall outlet. Use only power source as indicated. 
16.)  Use replacement parts as specified by the manufacturer. 
17.)  The product may be mounted to a wall only if recommended by the manufacturer. 
18.) Upon completion of any service or repairs to this product, ask the service technician to 

perform safety checks. 

19.)  Attention should be drawn to the environmental aspects of battery disposal 
 

 

 

 

The lightning flash with arrowhead 

symbol, within an equilateral 

triangle is intended to alert the user 

to the presence of insulated 

‘dangerous voltage’ within the 

product’s enclosure that may be of 

sufficient magnitude to constitute a 

risk of electric shock to persons. 

 

 

 

WARNING: TO REDUCE THE 

RISK OF ELECTRIC SHOCK 

DO NOT REMOVE COVER 

(OR BACK) , NO USER 

SERVICEABLE PARTS INSIDE 

REFER SERVICING TO 

QUALIFIED SERVICE 

PERSONNEL. 

 

 

 

The exclamation point within 

an equilateral triangle is 

intended to alert the user to 

the presence of important 

operating and maintenance 

(servicing) instructions in the 

literature accompanying 

the appliance. 

Summary of Contents for TIMEDOCK
















Reviews: