14
AUXILIARY IN
Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD
Player, Cassette Deck, Mini Disc player, etc., etc.,) to the
AUX IN
jack on the
back panel of the unit.
The auxiliary function will only activate when the aux
in jack is fitted with connection cable
Note:
The connection cables are not included.
1.) Slide the
FUNCTION
switch to
ON
position.
2) Press and hold the
PLAY/PAUSE
button on the main unit or press
iPod/AUX
button on the remote control to inter-change the play mode from iPod
to Aux.
Press
PLAY/PAUSE
button once on the main unit or
iPod/AUX
button on the
remote control to inter-change the play mode from Aux to iPod
. During
AUX playback, the iPod
display will show “Charging” or “Charged” depends
on the battery level .
3) Turn your auxiliary source ‘On’ and operate it as usual. The sound from the
auxiliary source will be heard through the speakers of this system.
5.) Adjust the
VOLUME
level controls of this system as desired.
SUBWOOFER OUT
Connect the Audio Output jacks of your active subwoofer to the
SUBWOOFER
OUT
jack on the back panel of the unit. Then the unit will become a 2.1 system
and the bass would be able to sound from the external active subwoofer.
Note: The connection cables and active subwoofer are not included.
RESETTING
If the system does not have any respond, you may have experienced a severe
electric shock (ESD) or a power surge that triggered the internal computer to shut
down automatically. If this occurs, simply disconnect the main power and connect
the main power again after one minute.
Note:
Although disconnect the power will unlock the internal computer after a
power surge, it will also erase all of the settings. After turning ‘On’ the unit, you will
need to reset the settings again.