12
turn off itself.
11.) If
SNOOZE
button is pressed during the alarm is activated, the alarm is set to
re-activate in 9 minutes.
Warning:
Do not plug in Aux while alarm is set, otherwise alarm will not be
activated.
Display Brightness Control
This Unit features a unique display brightness control system that
gives you two convenient options:
When the dimmer switch is set to the position, the clock display is at full
brightness. The dimmer switch was pre-set to the position at our factory.
When the dimmer switch is set to the
position, the display brightness is
reduced by approximately 50%.
Listening to Your iPod
Charging The Battery
IMPORTANT!
In order to prevent unwanted distortion during iPod
playback, it is
recommended that you set the EQ in your iPod to the “Off” position.
Go to the Main Menu in your iPod
and then select the Settings Menu,
select the EQ Setting, and make sure that the EQ function is set to
“Off”.
( Main Menu > Settings Menu > EQ Setting > Select “Off” )
Note : We have also included one flat adaptor
with no opening at all. This serves as a dust
cover that can be inserted in the docking station
if no iPod will be connected to this unit for an
extended period of time. Remove this dust cover
before use.
This unit provides an iPod
docking station on the top panel. You can connect
any “dockable” iPod to the TimeDock speaker system.
Your iPod came packed
with a small iPod bracket, place the iPod bracket on the speakers dock
before placing your iPod onto the TimeDock speaker system.
